home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 3
/
Gold Medal Software - Volume 3 (Gold Medal) (1994).iso
/
misc
/
amiscsi.arj
/
SCSITIP.002
< prev
next >
Wrap
Text File
|
1992-12-15
|
1KB
|
71 lines
Tech Tip
Product: Series 15
Tech Tip #: TTSCSI.002
Originator: Peter Jarrett
Date: March 1992
Subject: Using Drives with Distinctive Characteristics
Fujitsu Drives (MS2623FA, MS2624SA, M2266SA, M2652XA)
The SYNCHRONOUS jumper needs to be removed before use.
DEC Drives (RZ35 and RZ26)
needs to be jumpered for AUTO SPIN before use. The jumper is located on
the front panel of the drive, fourth from the left of the set of jumper
pins. The SCSI ID jumpers are the three sets of pins located to the left
of the AUTO SPIN jumpers. These drives are terminated by jumpering the
terminator jumper ONLY, located near the back of the drive.
NOTE: BIOS 1.08L or higher is required for all DEC drives
DSP 3085
Panasonic Optical Drives (LF7010 or LF7012A)
a. Under DOS, the following drivers are required:
Corel Driver (DOS) version 2.03 or higher
SCSI Express for DOS version 1.5.0 or higher.
b. Under SCO Unix 3.2.X:
SCSI Express for SCO UNIX version 1.3.0 or higher.
Interactive 3.0
The Archive 2525S tape drive works only with a 525 MB tape cartridge. Any
size less will produce a
"write I/O error".
Updated list of tested devices
Seagate 41200ND - Differential drives
Seagate ST1481N
Maxtor 7080SR
HP97560
HPC3010
HPC2247
M2623FA
M2624SA
M2266SA
M2652XA
Digital-RZ35
Digital-RZ26
Digital-DSP3085